FloPlast Mini Gutter External Stopend - 76mm Black - Pack of 2
In stock
Code
REM1BPK2
Click or tap the image to open in fullscreen
| Code | REM1BPK2 |
|---|---|
| EAN Code | 5056919006508 |
| Weight (kg) | 0.040000 |
| Width | 90mm |
| Angle | 0 |
| Brand | FloPlast |
| Colour | Black |
| Dimension | 47mm (H) x 33mm (L) x 90mm (W) |
| Pipe Fit | 0 |
| Guarantee | 10 Years Manufacturers |
| Length | 33mm |
| Height (mm) | 47mm |
| Material | PVC-u |
| Pack Size | Pack of 2 |
| Specification | BS EN 12200 / BS EN 607 |
| System Size | 76mm |
| Capacity | 0 |
External Stopends are used to cap off the gutter at the end of the run. They are called external because they fit over the outside of the gutter profile.
They are fixed to the gutter by clipping the back end into place first, then pulling the gutter gently down inside the front clip. This exerts an even pressure on the rubber seal to make a waterproof joint.
To prevent the end of the gutter from sagging down you should always support a stopend by fixing a fascia bracket within 150mm of the stop end.
This is a pack of two.
